ACF bonding machine fault repair case 2

Explanation of Common LCD Screen Malfunctions
Fault phenomenon; Screen colored lines, dashed lines (dotted lines)
Fault analysis; Firstly, the reason why color lines appear on LCD screens is mainly due to the fact that the resolution of LCD
screens is generally column * row. Taking the 1366X768 low split screen as an example, there are 1366 vertical lines in the resolution
of 1366. There are 768 horizontal lines, but 1366 refers to white lines. In reality, each white line on the line is composed of three lines:
R, G, and B (red, green, and blue). Therefore, the actual X-axis power supply has a total of 1366X3=4098 lines. If one line is interrupted
in the X-axis power supply, the color displayed on the screen will be incorrect, and colored lines will appear. Moreover, colored lines are
not complete, and some places on the color screen may show colored lines, while others may not. When diagnosing such faults,
simply set the screen to self check mode and switch between R, G, and B screens to analyze what color is missing. Of course, in
addition to the above one line, there is also one line for two-color and one line for three color misalignment power supply for the
X-axis power supply of the LCD screen. When diagnosing faults, it is only necessary to determine the number of COFs on the screen.
For example, a low split screen with a single COF is basically one line for three colors. As long as one line is broken, a black line
will be displayed on the R, G, and B screens. The same applies to high split screens with two COFs, and low split screens with
four or more COFs are basically one color; Most of the high-resolution screens with 4 COFs are powered by two colors on a
single line, while those with 6 or more COFs are mostly powered by one color on a single line. The phenomenon of colored
lines on the screen is generally caused by ITO breakage or COF damage. After removing the COF, inspect it with a microscope.
If the ITO is intact, replace the COF. If the ITO is damaged or broken, repair it with a laser wire.
