Explanation of Common LCD Screen Malfunctions

Fault appearance: vertical line on the screen (black screen)
Fault analysis: The main reasons for vertical lines on the LCD screen are as follows:
1. COF is damaged, the COF chip heats up during the operation of the LCD screen, and the chip pinsbecome loose during long-term operation. The vertical line is usually caused by screens that have beenin use for several years; To determine whether the COFIC is loose and causing vertical lines on the screen,
we only need to press the position of the COF IC with our fingers. If the vertical lines change, we can preliminarily damage the COF. Replacing the corresponding COF can repair the screen, and it is best to
stick a heat sink on the back of the COF after repair to extend its service life.
2. Electrode short circuit. The main cause of electrode short circuit is the short circuit of conductive particles on ACF adhesive, which leads to the appearance of vertical lines. This situation mainly occurs on repaired screens or screens with denser electrodes. 4K screens are more common. To determine this fault, we can set the screen to aging mode; Observe whether there are two or more colors with black lines appearing in the R, G, B states. If so, it is preliminarily judged as an ITO short circuit. Use a microscope to check if there are black spots on the ITO and if there is any accumulation of conductive particles. If so, remove the COFand re bond it
3. ITO circuit breaker, remove COF, check if ITO circuit breaker. This type of fault is mostly caused by liquid inlet. If the vertical line is caused by ITO disconnection, then the bonding COF cannot be repaired.We can only use laser machines for repair.
4. Screen internal short circuit, mainly caused by X-axis power supply to ground short circuit. This type of black wire
can only be repaired by cutting open the internal short circuit point with a laser machine.


